BIS Case Hardening Steels

  • Home
  • BIS ISI Mark Certification
  • BIS Case Hardening Steels
image

BIS Case Hardening Steels

Product Description

Case Hardening Steels are a type of steel used for specific purposes where the surface of a component needs to be hard and resistant to wear, while the core remains tough.

BIS CERTIFICATION FOR CASE HARDENING STEELS IS 4432:1988

INTRODUCTION

Case Hardening Steels are a type of steel used for specific purposes where the surface of a component needs to be hard and resistant to wear, while the core remains tough.

ISI 4432:1988 covers Case Hardening Steels. This standard specifies the technical delivery requirements for case-hardening wrought low-carbon unalloyed and alloyed steel bars, billets, rods, and finished forgings. In general, the steels are intended for forgings and the fabrication of case-hardened machines or automobile parts.

Case hardening of parts refers to parts that have been carburized or carbonitrided on their surface and then hardened to produce a high degree of hardness in the surface zone while the core material is relatively tough. The general requirements for material supply shall conform to IS 1387:1967.

To ensure the quality and conformity of Case Hardening Steels, manufacturers must undergo ISI Registration for case hardening steels, obtain ISI Certification for case hardening steels, and display the ISI Certificate for case hardening steels.

MANDATORY TESTING

·       Chemical composition

·       Hardness test

·       Ultrasonic test

·       Mechanical properties

·       Grain size

·       Dimensional tolerances

·       Additional tests

BIS Documents For Domestic and Foreign Manufacturer Checklist

BIS ISI Registration for Normal Process

BIS ISI Mark Certification Costing And Timeline

BIS ISI Mark Certification Timeline and costing
Note: foreign applications will be submitted through an offline process only. we can only check the grant of CML no. on the BIS portal for foreign applications

CONCLUSION

Case Hardening Steels fall under the mandatory ISI Certification Scheme, which adheres to the IS 4432:1988 standard in India. To import, export, or sell this product in the Indian consumer market, manufacturers must have the ISI Mark. If you require assistance with BIS ISI registration for case hardening steels or ISI mark certification for case hardening steels you can rely on Evtlindia.

We offer complete support for all the necessary paperwork at the BIS office in India, making the registration process smooth and hassle-free. We're here to guide you through the entire procedure from start to finish. If you need assistance, please feel free to reach out to us via email at contact@evtlindia.com or by phone at 9560935898. We're always here to help.

EVTL India, based in Preet Vihar, is a reputable certification agency that specializes in various certificates, including BIS, ISI, WPC, EPR, IMEI, BEE, and ISO. As trusted product testing consultants, we assist customers in obtaining a wide range of compliance and approvals.

Whatsapp call now mail
Call
Enquiry
Whatsapp