INTRODUCTION

Steel for spring washers is a special kind of steel used to make spring washers. These are small, round washers with a wavy edge. They're used to add tension or absorb shocks in things like cars, machines, and buildings.

To ensure the product quality of steel for spring washer, the Bureau of Indian Standards (BIS) has made it mandatory for manufacturers to undergo BIS registration and obtain the BIS ISI mark before selling it in the market. Manufacturers can use the ISI Mark on their products only after obtaining a license from BIS that is granted after BIS registration. The presence of the ISI mark on a product indicates that it complies with BIS's stringent quality standards.

IS 4072:1975 covers steel tubes for structural purposes. This standard specifies the specifications for steel in the form of plate, sheet, wire, or rod intended for use in the production of spring washers.

REQUIREMENTS FOR IS 4072: 1975

1.     Steel for spring washers shall be of the six grades as specified in the standard.

2.     Steel must be produced using an open hearth, an electric furnace, or a combination of these methods.

3.     Each ingot must have a sufficient discard to ensure freedom from harmful piping, undue segregation, and other harmful defects.

4.     Steel spring washers are commonly used in railway rolling stock, automobiles, and other engineering applications where a locking action against the rotation of the screwed or bolted assembly is required.

5.     The chemical composition must adhere to the specified standard.

6.     The material's surface must be reasonably smooth and free of harmful defects.

7.     Decarburization should be kept to a bare minimum.

8.     A decarburization limit can be agreed upon between the purchaser and the supplier.

9.     The material must be delivered in the dimensions specified by the buyer.

10.  The material shall be suitably identified with the manufacturer's name or trade mark, grade, cast number, or by such identification marks that the steel can be traced back to the cast from which it was made.

11.  A standard mark (ISI Mark) may also be applied to the product.

12.  The Manufacturer must obtain a BIS license from the Bureau of Indian Standards to use a standard mark (ISI Mark).

Benefits of BIS Certification

The BIS registration provides the following benefits:

1.     Increase sales: BIS-registered products are more likely to be of higher quality and attract more customers.

2.     Reduce the amount of money spent on quality maintenance: Upon getting certification, there's no need to follow separate quality guidelines for products.

3.     Enhance product credibility and reduce environmental risk: BIS-certified items are genuine and trustworthy because they work really well and last a long time.

4.     Ensure the highest level of quality and dependability: The presence of a BIS registration number implies that the product is of high quality and dependability.

5.     Ensure the organization’s expansion: BIS certification boosts your product’s reputation, resulting in significant growth and market exposure.

CONCLUSION

---

Steel for spring washer has been included in the mandatory ISI Certification Scheme under the IS 4072: 1975 standard. Manufacturers cannot import, export, or sell this product in the Indian consumer market without the ISI Mark imprinted.

If you need any assistance with BIS ISI registration for steel for spring washer or ISI mark certification for steel for spring washer, you can reach out to Evtlindia. We provide assistance with all documentation formalities with India's BIS office, ensuring a smooth and hassle-free registration experience, guiding you through the entire process from start to finish.

You can contact us via email at contact@evtlindia.com or by phone at 9560935898. Feel free to get in touch with us anytime for the support you need.

 

 

 

 BIS CERTIFICATION FOR STEEL FOR SPRING WASHER IS 4072: 1975

INTRODUCTION

Steel for spring washers is a special kind of steel used to make spring washers. These are small, round washers with a wavy edge. They're used to add tension or absorb shocks in things like cars, machines, and buildings.

To ensure the product quality of steel for spring washer, the Bureau of Indian Standards (BIS) has made it mandatory for manufacturers to undergo BIS registration and obtain the BIS ISI mark before selling it in the market. Manufacturers can use the ISI Mark on their products only after obtaining a license from BIS that is granted after BIS registration. The presence of the ISI mark on a product indicates that it complies with BIS's stringent quality standards.

IS 4072:1975 covers steel tubes for structural purposes. This standard specifies the specifications for steel in the form of plate, sheet, wire, or rod intended for use in the production of spring washers.

REQUIREMENTS FOR IS 4072: 1975

1.     Steel for spring washers shall be of the six grades as specified in the standard.

2.     Steel must be produced using an open hearth, an electric furnace, or a combination of these methods.

3.     Each ingot must have a sufficient discard to ensure freedom from harmful piping, undue segregation, and other harmful defects.

4.     Steel spring washers are commonly used in railway rolling stock, automobiles, and other engineering applications where a locking action against the rotation of the screwed or bolted assembly is required.

5.     The chemical composition must adhere to the specified standard.

6.     The material's surface must be reasonably smooth and free of harmful defects.

7.     Decarburization should be kept to a bare minimum.

8.     A decarburization limit can be agreed upon between the purchaser and the supplier.

9.     The material must be delivered in the dimensions specified by the buyer.

10.  The material shall be suitably identified with the manufacturer's name or trade mark, grade, cast number, or by such identification marks that the steel can be traced back to the cast from which it was made.

11.  A standard mark (ISI Mark) may also be applied to the product.

12.  The Manufacturer must obtain a BIS license from the Bureau of Indian Standards to use a standard mark (ISI Mark).

Process for BIS ISI Mark Certification (IMAGE Example)

 

To know the process in detail, please visit:

·       ISI Mark Certification for Domestic Manufactures 

·       ISI Mark Certification for Foreign Manufactures

 

Process for BIS ISI Mark Certification

To know the process in detail, please visit:

• ISI Mark Certification for Domestic Manufactures
• ISI Mark Certification for Foreign Manufactures

Under BIS Registration Products ISI and CRS

• BIS CRS Registration For IT Products List
• ISI Mark Registration For ISI Products List

Benefits of BIS Certification

The BIS registration provides the following benefits:

1.     Increase sales: BIS-registered products are more likely to be of higher quality and attract more customers.

2.     Reduce the amount of money spent on quality maintenance: Upon getting certification, there's no need to follow separate quality guidelines for products.

3.     Enhance product credibility and reduce environmental risk: BIS-certified items are genuine and trustworthy because they work really well and last a long time.

4.     Ensure the highest level of quality and dependability: The presence of a BIS registration number implies that the product is of high quality and dependability.

5.     Ensure the organization’s expansion: BIS certification boosts your product’s reputation, resulting in significant growth and market exposure.

 

 

 

CONCLUSION

Steel for spring washer has been included in the mandatory ISI Certification Scheme under the IS 4072: 1975 standard. Manufacturers cannot import, export, or sell this product in the Indian consumer market without the ISI Mark imprinted.

If you need any assistance with BIS ISI registration for steel for spring washer or ISI mark certification for steel for spring washer, you can reach out to Evtlindia. We provide assistance with all documentation formalities with India's BIS office, ensuring a smooth and hassle-free registration experience, guiding you through the entire process from start to finish.

You can contact us via email at contact@evtlindia.com or by phone at 9560935898. Feel free to get in touch with us anytime for the support you need.