BIS REGISTRATION FOR FABRICATED HIGH DENSITY

  • Home
  • BIS ISI Mark Certification
  • BIS REGISTRATION FOR FABRICATED HIGH DENSITY
image

BIS REGISTRATION FOR FABRICATED HIGH DENSITY

Product Description

Fabricated high-density polyethylene (HDPE) fittings for portable water supplies are manufactured components used in water distribution systems by utilizing HDPE pipes. HDPE is a durable, chemical-resistant, and flexible plastic material commonly used for water supply applications. These fittings are made through a fabrication process that involves shaping and joining segments of HDPE pipes.

 

BIS REGISTRATION FOR FABRICATED HIGH DENSITY POLYETHYLENE (HDPE) FITTINGS FOR POTABLE WATER SUPPLIES ACCORDING TO IS 8360 (PART 1 TO 3): 1977

INTRODUCTION

Fabricated high-density polyethylene (HDPE) fittings for portable water supplies are manufactured components used in water distribution systems by utilizing HDPE pipes. HDPE is a durable, chemical-resistant, and flexible plastic material commonly used for water supply applications. These fittings are made through a fabrication process that involves shaping and joining segments of HDPE pipes.

To ensure product quality and consumer safety, the Bureau of Indian Standards (BIS) has made it mandatory for manufacturers to undergo BIS registration and obtain the BIS ISI mark before selling their products in the market. Manufacturers can use the ISI Mark on their products only after obtaining a license from BIS that is granted after BIS registration. The presence of the ISI mark on a product indicates that it complies with BIS's stringent quality standards.

Road transport safety glass falls under the IS 8360 (PART 1 TO 3): 1977 standard. This rule outlines the requirements, sampling, and testing methods for Fabricated high-density polyethylene (HDPE) fittings.

List of Test Equipment

 Major test equipment required to test as per the Indian Standard

 

 S. No.

Tests used in with Clause

    (Reference)

Test Equipment

1.

Dimensions of fittings [Clause 4 of IS 8360 (Part 1)] Laying length [Clause 2.2.2 of IS 8360 (part 2 ) and (Part 3)] Wall thickness [Clause 2.3.2 of IS 8360 (part 2 ) and (Part 3)] -

Vernier caliper - Measuring Tape - Pi Tape or Circometer - Ball ended Micrometer - Measuring scale

2.

Hydraulic proof test [Clause 5.1 of IS 8360 (Part 1)] - Hydrostatic pressure testing apparatus with pressuring unit, timer and multiple outlets - End plugs

The above list is indicative only and may not be treated as exhaustive.

BIS Documents For Domestic and Foreign Manufacturer Checklist
BIS ISI Registration for Normal Process

BIS ISI Mark Certification Costing And Timeline

BIS ISI Mark Certification Timeline and costing

To Know The Process in Detail, Please Visit:

ISI Mark Certification for Domestic And Foreign Manufactures

Under BIS Registration Products ISI and CRS

Note: foreign applications will be submitted through an offline process only... we can only check the grant of CML no. on the BIS portal for foreign applications
CONCLUSION

Fabricated high-density polyethylene (HDPE) fittings manufacturers and importers are required to obtain a BIS certificate/license for their products to use the standard ISI mark. Fabricated high-density polyethylene (HDPE) fittings without the ISI mark is not allowed to be sold in the country.

If you require any assistance with BIS ISI registration for Fabricated high-density polyethylene (HDPE) fittings or ISI mark certification for Fabricated high-density polyethylene (HDPE) fittings, you can reach out to Evtlindia. We offer assistance with all documentation formalities with India's BIS office, ensuring a smooth and hassle-free registration experience, guiding you through the entire process from start to finish.

We can be contacted via email at contact@evtlindia.com or by phone at 9560935898. Feel free to get in touch with them anytime for the support you need.

Whatsapp call now mail
Call
Enquiry
Whatsapp